Product Description
Polaris General 1000 (2016-2025) - Ice Crusher Cab Heater
*** NEW in 2024! Kits now include OEM Style Rectangular Vents for the Defrost.
Fitment Note: This kit does not fit with the Fosgate Stage 3 & Stage 4 sound system upgrades, Find the Fosgate Compatible Version Here:
Use your cooling system to heat your cab! From the original designer of the Firestorm UTV Cab Heaters comes our new and improved Ice Crusher Compact UTV Heaters. This Ice Crusher Under Dash Heater kit has 6 vents- 2x center area vents, 2x lower dash and 2x defrost vents. Our Under Dash Heater fits completely up in behind the right side of the dash. This kit come with a compact yet powerful heater with a three speed fan which will deliver heat from the 14,600 BTU* Compact Heater Unit. Adjustable louvers direct the heat were you need it. Two 2" vents mount on each side of the dash top to defrost the windshield, two 2” vents mount in the center dash panel and two 3” vents mount in the lower dash area. Kit is also available with optional in dash Heat Control (shown in dash vent picture). A unique feature of our kit is that the heater intake comes from inside the cab where the air is cleaner and warmer. Warmer air means more available heat for you inside the cab. Kits are supplied with our custom CNC made Aluminum Y connector and brass 3-Way Ball valve that connects directly to the engines cooling system for fast and consistent heat. Our Ice Crusher 3-Way valve delivers maximum heat in the winter and allows for complete heat shutoff in the warmer months when engine cooling is the priority. Kits also include custom CNC laser cut mounting brackets, heater hoses and duct hoses, hose clamps, new and improved vents, hole saws (for the heater hoses and vents), grommets, switch, wiring loom and terminals included, templates, your specific mounting bracket with hardware and instructions. Please Note: New Updated Speed and Heat Control Switches.
*Heater BTU# output is theoretical and is dependent on the coolant temperature of the UTV and the flow rate of the coolant, which varies by UTV and engine RPM. Outside (ambient) temperature the UTV is being operated in also can change heater output. That being said these 14,600 BTU Heater Units are more that capable of heating 99.99% of all UTV's
#British Thermal Unit (BTU or Btu) is a traditional unit of work needed to raise the temperature of one pound of water by one degree Fahrenheit. One four-inch wooden kitchen match consumed completely generates approximately 1 BTU.
For Heater FAQ and Troubleshooting Click Here
Warranty:
Three year limited warranty. For Warranty Info Click Here
Shipping Details:
Shipping is FREE for the lower 48 States. For Canadian provinces that border the USA, there is a $30 per heater kit charge, and for non-bordering provinces, the fee is $50 per heater kit. The Customer is responsible for Brokerage, Duties, and Fees. All other international orders require quote, please contact us with inquiries (info@utvheaters.com)
Returns:
Returns are accepted within 30 days of purchase and are subject to a 10% restocking fee. The customer is responsible to pay return shipping and the item must be returned in a new condition to receive a refund.
Below is a customer's review of a Ice Crusher Polaris General Heater posted on YouTube.
Product Videos
Custom Field
Product Reviews
11 Reviews Hide Reviews Show Reviews
-
Heating system
Great heating system. Easy to install. Color instructions, vary high quality product. Would recommend to anyone wanting a warm cab.
-
Ice Crusher -Polaris General
The kit was well made, and now that its installed, its working great. I had a few pauses/questions along the way one of which I called customer service. They were great, I even talked to the engineer that had better knowledge on the product. The directions were adequate, but I had some learning to do about disassembly of my unit. These were not in the instructions. There was a video online that l watched, and he did things a bit different than the instructions. I could see how his method made things much easier, as he connected the hot water line at the front of the bike, not at the back (like the instructions suggested). I had purchased the maxstat option, and the engineer advised me why I should follow the suggestion of the instructions. Once connected, I had no heat for a while, as I had air in my system I expect. Eventually it worked its way through, and it is good. I purchased the dash controls as well. The kit seems to have good vent locations. The thermostat dial had a problem when I received it, but it was easily fixed. The clip that holds the plastic portion of the cable was not installed. I attached it, and continued. This was a problem later, as it disconnected again, after the dash was reinstalled. I removed it again (windshield and Dash) and reattached. It seems to be ok now (its only been installed for 2 days.) all and all, I'm happy with the heater. I have not experienced any cold weather yet to see if it will keep up, but it is throwing heat when asked.
-
Ice Crusher Cab Heater Polaris General
Great product had a little problem with the installation. Pretty much straightforward on installation. Ben did do a little video on the installation (Youtube. General Talk with Ben). other than that great deal. Will buy from again.
-
Ice crusher heater
Everything arrived on time and people were very helpful and easy to deal with. The product is very well made and everything bolted in perfectly.
-
Better than expected
the kit was very complete and fit was mush better than I expected. After the installation was done I had a leak from the heater core and the costumer service was awesome. I was conservative and did not purchase the MaxStat and now I am putting in on, I would recommend anybody put it on initially.
-
Warm and Toasty
I would highly recommend the Ice Crusher Heater!! With the 6 vents it allows you to distribute the heat where you want and need it. The install was not hard but did take about 6 hours. I was amazed that everything except some pipe sealing tape was in the kit. They even sent the 3 hole saws needed to install the system. I feel after looking at others on the market that this is most definitely the BEST!!! on the market! Last but not least the customer service was exceptional. Extremely quick shipping and after it arrived they helped me anyway they could. I would most definitely recommend this product and will purchase it again with my next UTV!
-
Ice crusher Heater
This was my first major mechanical work I have done before on a vehicle. The instructions were amazing the customer service to answer my text message even better. The unit took me roughly 4 hrs to install and was not difficult at all. Heater works great very excited as we head into winter. Thank you for a great experience.
-
Great heater
This heater is as hot as my truck. Only been in a few days but so far so good. Comes with everything you need to install. I've been around the oem heaters and this one is as good, and an easier install. Takes a little work to install but nothing very complicated.
-
Great!
Great heater, comes with everything you need! For the price you can't beat it!
