Fits 2016+ Kawasaki Teryx 4 and 800 Models
Use your cooling system to heat your UTV's cab! From the original designer of the Firestorm UTV Cab Heaters comes our new and improved Ice Crusher Compact UTV Heaters. What makes our heaters better, if not the best, is that you are dealing with the designer/manufacturer and most of the kits have been installed by us and fitment checked. We use modern automotive quality vents- not something that looks like is was made in the 50's, so they match the modern styling of your UTV. Most of our kits use custom made solid CNC machined Y connection fittings, so there is no chance of leaking welds. We endeavor to use quality parts and hardware in all our kits.
This Ice Crusher Under Hood Heater kit has 6 Vents and comes with a compact yet powerful heater with a three speed fan which will deliver heat from the 14,600 BTU* Compact Heater Unit. Modern automotive quality adjustable vents direct the heat were you need it. Two 2" vents mount on top of the center dash to defrost the windshield, two 3” vents mount in the center dash panel and two 2” vents mount in the lower dash area. A unique feature of our kit is that the heater intake comes from inside the cab were the air is cleaner and warmer. Warmer air means more available heat for you inside the cab. Kits are supplied with our custom CNC made alloy Y connector and fittings that connect directly to the engines cooling system for fast heat (does not require our MaxStat). Kits also include custom CNC laser cut mounting brackets, heater hoses and duct hoses, hose clamps, new and improved vents, hole saws (for the heater hoses and vents), grommets, Switch, wiring loom and terminals included, templates, your specific mounting bracket with hardware, and instructions.
*Heater BTU# output is theoretical and is dependent on the coolant temperature of the UTV and the flow rate of the coolant, which varies by UTV and engine RPM. Outside (ambient) temperature the UTV is being operated in also can change heater output. That being said these 14,600 BTU Heater Units are more that capable of heating 99.99% of all UTV's
#British Thermal Unit (BTU or Btu) is a traditional unit of work needed to raise the temperature of one pound of water by one degree Fahrenheit. One four-inch wooden kitchen match consumed completely generates approximately 1 BTU.
For Heater FAQ and Troubleshooting Click Here
Fits 2016+ Kawasaki Teryx 4 and 800 Models
Three year limited warranty. For Warranty Info Click Here
Shipping is FREE for the lower 48 States and a flat $60 US Dollars to Canada which INCLUDES Taxes and Duties. All other international orders require quote, please contact us with inquiries (email@example.com)
Electrical items are not returnable. Any electrical returns MUST be authorized on a case by case basis or they will be refused. No returns considered after 30 days. Customer pays return shipping and 20% restocking fee. Returns must be returned in unused condition with original box, pieces, and instructions.
1 Review Hide Reviews Show Reviews
This heater kit is a very good extensive and well thought out, but cold be a little better. This is my second UTV heater install, but this is my first time doing a coupers products install. All heater installs can be time consuming and tricky depending on the UTV and the kit ,so being prepared is key. Like I said in the beginning, this is a very well put together kit. The heater core and fan seam very good. Now for some suggestions and or tips. Coupers products seam to take pride in mentioning that "Y" is machined , but it's only 2/3's machined the other 1/3 is a threaded brass fitting. Now if your going to do that for the "Y" fitting why not do that for the "T" fitting instead of using plastic. The plastic "T" is placed on top the engine between the cylinders so with all the heat you might be lucky to get three years or so before you have to worry about it failing. The duct hose depending on the install cold be longer on some spans and shorter on others, but regardless be careful because one wrong measurement or cut and you will not have enough. Directions are pretty good if you can follow what they mean by reading and looking at pictures. Now the day before I did my install I did grab a few extra things to be better prepared. First I went to the auto parts store and grabbed another six foot piece of 5/8 heater hose. The piece you get would probably work and hopefully have just enough, but I didn't want to come up short in the middle of an install. I used the piece in the kit for one span and the piece I bought for the other span. Also stopped by my local Lowe's and got a brass "T" so I didn't have to use the plastic one included in the kit. I personally just fell better with brass over plastic. Other than that it is very time consuming, but in the end all went well. Purge a little air out of the system a few times, add coolant, warm the engine and bam you got heat. Time will tell, but with the awesome three year limited warranty Iknow I'm good for at least three years. Thanks coupers products, I've already been telling friends about your various kits.